Description
Edwards and Cromwell Stop It Pipe Repair System
The Stop It Pipe Repair System is ideal for repairing pipe leaks, reinforcing pipe joints, rebuilding thinning pipe walls and corrosion proofing - in virtually any situation, even under water. It fully cures to a hard, durable repair in 30 minutes.
The system includes a strong knitted fiberglass tape coated with fast settling urethane resins that are water-activated. The system also includes FIX STIX, a steel-filled hand-moldable epoxy that sets rock hard in only 20 minutes. It is perfect for plugging leaks, filling cracks and complex voids and offsets at couplings and fittings.
Using Stop It urethane rich fiberglass tape in combination with FIX STIX greatly increases repair capacity. One person, with no special tools and no hot work can apply this quick in-field repair system in minutes.
Whether you are repairing a chemical process line or any other critical pipeline, the Stop It Pipe Repair System is your dollar-saving ally in the battle against lost-production costs in common situations. Under certain conditions an active gravity-flow leak (about 15 PSI or less) from a pinhole may be repaired without shutting down.
Each Kit Includes:
*Included FIX STIX hand moldable epoxy is resistant to hydrocarbons and most chemicals and is NSF certified for use
Stop It works on:
Stop It is used for:
Stop It is used by:
The Stop It Pipe Repair System is ideal for repairing pipe leaks, reinforcing pipe joints, rebuilding thinning pipe walls and corrosion proofing - in virtually any situation, even under water. It fully cures to a hard, durable repair in 30 minutes.
The system includes a strong knitted fiberglass tape coated with fast settling urethane resins that are water-activated. The system also includes FIX STIX, a steel-filled hand-moldable epoxy that sets rock hard in only 20 minutes. It is perfect for plugging leaks, filling cracks and complex voids and offsets at couplings and fittings.
Using Stop It urethane rich fiberglass tape in combination with FIX STIX greatly increases repair capacity. One person, with no special tools and no hot work can apply this quick in-field repair system in minutes.
Whether you are repairing a chemical process line or any other critical pipeline, the Stop It Pipe Repair System is your dollar-saving ally in the battle against lost-production costs in common situations. Under certain conditions an active gravity-flow leak (about 15 PSI or less) from a pinhole may be repaired without shutting down.
Each Kit Includes:
- Stop It knitted fiberglass tape pre-coated with water-activated polyurethan resins
- FIX STIX hand moldable epoxy*
- Gloves for easy clean up
- Detailed directions
*Included FIX STIX hand moldable epoxy is resistant to hydrocarbons and most chemicals and is NSF certified for use
Stop It works on:
- Any metal or plastic pipe:
- Steel
- Copper
- Aluminum
- Galvanized Black Iorn
- Stainless steel
- PVC CPVC
- Fiberglass
- Polyethylene Polypropylene and even PVDF
- Pressure to 400 PSI
- Temperatures to 500 Degree Fahrenheit
- Recommended for use on pipes up to 18 inches in diameter
Stop It is used for:
- Routine and emergency leak repair
- Hazardous material spill control
- Structural reinforcement
- Sealing joints
- Rebuilding thinning wall
- Corrosion proofing
- Abrasion protection
- Repairs in hard to reach areas
- Underwater repairs
- Electrical conduit repair
Stop It is used by:
- Petrochemical
- Industrial Processing
- Pulp and Paper
- HazMat Response
- Military
- Marine
- Irrigation
- Power Generation
- Facilities Maintenance
- Water/Wastewater
- Manufacturing
- Commerical Fishing
- Food Processing
- Pharmaceutical
- Automotive
Details
SKU: |
EC-STOPIT |
